Glossary
Deck building terms,explained.
132 terms from deck construction, from framing and fasteners to railings and specialty hardwoods, so you can talk through a plan with us in the same words.
A
- Acclimation
- Allowing wood to adjust naturally to its environment until it reaches equilibrium moisture content (EMC).
- Accoya
- A modified wood created through acetylation, offering exceptional rot resistance, dimensional stability, and durability for exterior use.
- Acrylic Coating
- A water-based protective coating for decks, creating a durable, weather-resistant surface.
- Adjustable Post Anchor
- Hardware for positioning deck posts and elevating them off the footing to prevent water damage.
- Air Dried
- Wood dried naturally without kilns, reducing movement for certain hardwoods.
- Alaskan Yellow Cedar
- Pale yellow, naturally rot-resistant softwood valued for durability and fine grain.
- Angled Decking
- Deck boards installed at an angle to the joists for aesthetics or design patterns.
- Apuleia leiocarpa (Garapa)
- A high-density tropical hardwood from South America with golden tones and excellent durability.
B
- Baluster (Spindle)
- A vertical or horizontal element in a railing system, typically spaced ≤4" for safety.
- Bamboo Decking
- Engineered decking made from compressed bamboo fibers, durable and eco-friendly.
- Batu
- A durable tropical hardwood with a mahogany-like appearance and resistance to decay.
- Beam (Girder)
- A heavy horizontal framing member supporting joists.
- Beam Pocket
- A recessed area in a wall or masonry where a beam is seated.
- Beam Span
- The maximum distance a beam can span between supports without additional posts.
- Beam Span Table
- A reference chart showing the maximum allowable beam spans based on lumber size, species, and load conditions.
- Black Locust
- Extremely durable North American hardwood, naturally insect- and rot-resistant.
- Blocking
- Short pieces of lumber between joists or beams to add rigidity and prevent twisting.
- Board Bender
- A tool used to straighten bowed deck boards.
- Bottom Rail
- The lower horizontal member of a railing assembly supporting balusters or infill.
- Box Sill
- The framework of joists and headers at the perimeter of a deck.
- Bracing (Cross Bracing)
- Angled or X-shaped supports between posts or beams for stability.
- Bridging
- Short lumber pieces between joists to prevent twisting and increase strength.
- Bull Nosing
- A rounded edge on stair treads or top rails.
- Butt Joint
- Where the ends of two boards meet over a joist.
C
- Cable Railing
- Railing system using stainless steel cables for infill.
- Caisson
- A large cylindrical concrete foundation poured into a drilled hole below the frost line to support posts or columns.
- Camber
- A slight upward curve in a beam to prevent sagging.
- Cant Strip
- A beveled strip installed where a horizontal surface meets a vertical one, often used in waterproof deck membranes to ease the angle and improve durability.
- Cantilever
- A projecting beam or deck section supported only at one end.
- Cap Rail
- The topmost horizontal member of a railing system.
- Capstock Decking
- Composite decking with a protective outer layer for enhanced durability.
- Cedar Decking
- Naturally rot-resistant decking from cedar wood.
- Closed Stringer
- Stair stringer with solid sides hiding the treads and risers.
- Composite Decking
- A blend of wood fibers and plastic for low-maintenance decking.
- Concrete Footing
- A below-grade concrete base that transfers deck loads to the ground.
- Cumaru
- A dense, durable tropical hardwood ranging from yellow-brown to reddish-brown.
- Cupping
- Upward curling of deck board edges due to uneven moisture exposure.
D
- Deck Blocks
- Precast concrete supports for decks in frost-free areas.
- Deck Footing
- The structural base that supports deck posts.
- Decking
- The surface boards forming the walking area of a deck.
- Decking Clip
- Hidden fastener used to secure decking boards to joists.
- Deflection
- The amount a structural member bends under load.
- Diamond Pier Footing
- A precast concrete deck foundation system with angled steel pins driven into soil.
- Douglas Fir
- Strong, straight-grained softwood often used in framing and beams.
- Drink Rail
- A wide, flat top rail designed to hold drinks.
- Drop Beam
- A beam positioned below the joists rather than flush.
E
- Eased Edge
- A slightly rounded edge on deck boards to reduce splintering.
- Eco-Friendly Decking
- Decking made from sustainable or recycled materials.
- End Grain
- The exposed end of wood showing growth rings.
- EPDM (Ethylene Propylene Diene Monomer)
- A synthetic rubber membrane commonly used for waterproofing flat or low-slope roof decks and under-deck areas.
- Equilibrium Moisture Content (EMC)
- The moisture level where wood is in balance with its environment.
- Expansion Gap
- Space left between decking boards to allow for movement.
F
- Face Screwing
- Attaching deck boards by driving screws directly through the surface.
- Fascia (Skirting)
- Boards covering the ends of joists for a finished look.
- Fascia Mount
- Mounting railing posts to the side of the deck frame.
- Flashing
- Waterproof material that prevents water intrusion where a deck meets a structure.
- Flashing Tape
- Adhesive membrane applied to joists or beams to prevent rot.
- Flush Beam
- A beam installed level with joists for a uniform surface.
- Footing Depth
- The depth of a footing required for frost protection, per code.
G
- Garapa
- High-density hardwood with golden tones, naturally resistant to rot and insects.
- Girder
- Another term for a main supporting beam.
- Glass Panel Railing
- Railing with tempered glass infill for unobstructed views.
- Glu-Lam Beam (Glued Laminated Timber)
- A structural beam made from layers of lumber glued together for strength and stability, often used for long spans.
- Grain Pattern
- The natural lines and textures visible in wood.
- Guardrail
- A safety barrier along deck edges to prevent falls.
H
- Handrail
- A graspable rail for support, especially on stairs.
- Header
- A joist running perpendicular to other joists, supporting their ends.
- Heartwood
- The dense, inner portion of a tree, usually more rot-resistant.
- Helical Pile
- A steel screw-type foundation driven deep into the ground for stability.
- Hem-Fir
- Lumber from a mix of Western hemlock and fir species, often used for framing.
- Hidden Fasteners
- Systems that secure deck boards without visible screws or nails.
I
- Ipe
- Extremely dense tropical hardwood, also called Brazilian Walnut.
J
- Jatoba (Brazilian Cherry)
- A dense, reddish hardwood with high durability.
- Joist Hanger
- Metal connector that secures joists to beams, ledgers, or rim joists.
- Joist Span
- The maximum unsupported length a joist can span under load.
- Joist Tape
- A waterproof adhesive tape applied to the tops of joists to prevent moisture penetration and extend framing life.
K
- Kerf Cut
- A narrow saw cut used for bending or fitting boards.
- Knee Brace
- A diagonal support between posts and beams.
L
- Lag Screw
- A large screw for heavy-duty structural fastening.
- Landing
- A flat platform at the top, bottom, or between flights of stairs.
- Lattice
- Decorative framework, often used as skirting.
- Ledger Board
- A horizontal board attached to a building to support joists on one side.
- Live Load
- The weight a deck is designed to support from people, furniture, and temporary items.
- Low-Clearance Deck
- A deck less than 30" above the ground requiring extra ventilation.
M
- Machiche
- A dense tropical hardwood with chocolate brown tones, sustainably harvested.
- Marine Grade Plywood
- Plywood designed for moisture resistance.
- Massaranduba (Brazilian Redwood)
- A dense tropical hardwood with deep reddish tones.
- Meranti
- Southeast Asian hardwood used for decking and trim.
- Miter Joint
- A corner joint made by cutting boards at an angle.
- Moisture Barrier
- Material that prevents water intrusion into structural components.
N
- Nominal Size
- Standard lumber dimension before planing to final size.
O
- On-Center (OC)
- The measurement from the center of one framing member to the next.
- Open Stringer
- Stair stringer with notches visible along the treads.
P
- Pergola
- An open-framed structure providing partial shade.
- Picture Frame Border
- A perimeter design using deck boards for a finished edge.
- Pier
- A precast concrete support that rests on a footing or directly on the ground.
- Pilot Hole
- A small hole drilled before inserting a fastener.
- Post
- A vertical structural member supporting beams and framing.
- Post Anchor
- Hardware that secures posts to footings while keeping them elevated.
- Post Cap
- A decorative or protective covering for a post top.
- Pressure-Treated Lumber
- Wood treated with chemicals to resist decay and insects.
- Purpleheart
- A dense tropical hardwood with a natural purple hue.
Q
- Quartersawn Lumber
- Boards cut perpendicular to growth rings for stability.
R
- Railing System
- The complete assembly of rails, posts, balusters, and infill.
- Redwood
- A naturally rot-resistant softwood with a reddish hue.
- Rim Joist
- The outermost joist capping the ends of the floor joists.
- Riser
- The vertical component between stair treads.
S
- Sapwood
- The lighter, softer wood near a tree’s bark.
- Screw Gun
- A power tool for driving screws.
- Scribing
- Fitting a board to match an irregular shape.
- Shake
- A split in wood along the grain.
- Snow Load
- The additional load a deck must support from accumulated snow, determined by building codes and climate data.
- Softwood
- Wood from coniferous trees, generally less dense than hardwoods.
- Sonotube
- A cardboard form used to shape poured concrete footings.
- Southern Yellow Pine (SYP)
- Strong, common structural lumber often pressure-treated.
- Spruce-Pine-Fir (SPF)
- Economical framing lumber used in substructures.
- Stair Stringer
- A diagonal framing member supporting treads and risers.
- Stringer Spacing
- The distance between stair stringers for proper support.
T
- T&G (Tongue and Groove)
- A joint where a protruding “tongue” fits into a matching “groove.”
- Teak
- A durable tropical hardwood, golden-brown, highly resistant to decay.
- Thermally Modified Wood
- Heat-treated to improve stability and decay resistance.
- Tigerwood
- Exotic hardwood with distinctive dark striping.
- Tread
- The horizontal surface of a stair step.
- Treated Micronized Copper Azole (MCA)
- A modern preservative for pressure-treated lumber.
- Tropical Hardwoods
- Dense woods grown in tropical climates, prized for durability.
U
- Under-Deck Ceiling
- A water-diversion system installed under a deck.
- UV Protector
- Coating that shields wood from UV damage.
V
- Vinyl Decking
- Low-maintenance decking made from vinyl.
W
- Warp
- Distortion in wood from uneven drying or exposure.
- Western Red Cedar
- Lightweight, aromatic, naturally decay-resistant softwood.
- Winder Step
- A stair step wider on one side, used to change direction.
Z
- Zero-Maintenance Decking
- Materials like composites or PVC that require minimal upkeep.
Planning a deck or a new backyard?
Give us a call.
